Dosimeter for measuring the average ethylene oxide concentration. The level of concentration in the testing zone can be calculated based on the quantity absorbed by the dosimeter, depending on the whether.
The 3M™ Diffusion Monitor is a sampling device designed to
measure average concentrations of certain contaminants over
a measured time interval. It can be used for either personal
or area monitoring. As a personal monitor, it is worn near the
breathing zone of individuals exposed to potentially hazardous
environments. When used as an area monitor, hang it away
from walls, corners, table tops, or other regions where the air
movement in the room may be limited.
Stay on top of exposure to risky substances with this ethylene oxide monitor from 3M. It's a sampling device that you can attach directly to your clothing to monitor the amount of ethylene oxide in the air around you. Alternatively, hang it up away from walls and counters to get a reading on the amount of gas present in a particular area.
• Accuracy of ±25% at 1ppm for reliable measurements
• Lapel clip easily attaches to clothing
• No extra equipment or batteries required
• Suitable for use in demanding conditions thanks to an operating temperature range of -30°C to +55°C
• Chemical processing plants
• Hospitals
• Pharmaceutical manufacturing
Any contaminant present collects on the monitor's permeable membrane due to the diffusion principle. After the test period is up, send this sample to your laboratory for analysis.
3M are a trusted name in personal protection equipment, providing a variety of solutions for health and safety compliance over a range of industrial applications. Their selection of respiratory protection equipment ranges from disposable face masks to full air-powered respirators, to ensure worker safety in all kinds of environments where airborne particulates might be a concern. When it comes to PPE, 3M is a brand you can rely on.
属性 | 数值 |
---|---|
气体检测 | 环氧乙烷 |
精确度 | ±25 % |
应用 | 制药, 医疗保健 |
仪表类型 | 个人类型 |