这些高压PCB和面板安装簧片继电器具有高达15kV的高隔离电压。应用包括测试设备和高电压电源。所有型号均高度可靠且质量良好。
大功率开关
通孔PCB和面板安装或飞线型号
可选15kV高隔离型号
钨触点可实现高电压开关
This Sensata Cynergy3 reed relay directs the electromagnet in a high-voltage reed switch. You can use it with switches of up to 24 volts on a direct current (DC), making it suitable for applications such as cardiac defibrillators, Triac trigger devices and high-voltage power supplies. The nylon studs connect to industry-standard circuits to create an airtight seal that stops dust from getting in. This unit offers low-power operation, making it an energy-efficient option.
• Mounts on a panel or printed circuit board (PCB) to suit your application
• High voltage connections via flying leads, solder turret (wire wrap), or 1/4" spade terminals for flexible installation
• Low contact resistance so contact interface isn't disrupted or melted under high power
The relay has a wide operating temperature range of -20°C to +70°C, so you can use it in demanding environments where extremes of cold and heat are likely.
The relay has an approximate lifespan of 1,000,000 electrical cycles so you can be confident it's a long-lasting option.
属性 | 数值 |
---|---|
触点配置 | 单刀 - 常闭 |
线圈电压 | 24V 直流 |
安装类型 | 面板 |
最大切换电流 交流 | 2 A |
最大切换电流 直流 | 2 A |
最大切换电压 交流 | 7000V |
最大切换电压 直流 | 7000V 直流 |
线圈电阻 | 925 Ω |
长度 | 60mm |
高度 | 18.5mm |
深度 | 15.8mm |
尺寸 | 60 x 15.8 x 18.5mm |
线圈对触点绝缘 | 17kV ac/dc |