紧急停止和扩展模块,用于
- 机器紧急停止切换
- 监控滑动格栅护罩
安全类别 4 ,符合 EN954-1
工作状态指示灯
22.5 mm 总宽度
1 或 2 通道配置
接通按钮上的线路端接识别
带或不带交叉识别
只能与更高级别的紧急停止模块一起使用
冗余和强制导向触点
单通道配置
CE
EN 60204-1 (停止功能) , EN 418 , prEN574 , prEN 954-1 , IEC/EN 60204-01 ,
EN 954-1
The Dold LG5925 series emergency stop module has 2 channels 3NO/1NC normal state configuration. This extension unit has a supply voltage of 24VDC/AC.
1 semiconductor output
Line fault detection on on-button
Manual restart or automatic restart, switch S2
With or without cross fault monitoring in the E-stop loop, switch S1
Cross fault monitoring in the E-stop loop
LED indicator for state of operation
LED indicator for channel 1 and 2
Removable terminal strips
Wire connection also 2mm x 1.5mm2 stranded ferruled, or 2mm x 2.5mm2
Fixed screw terminals connection
Emergency stop circuits on machines
Monitoring of safety gates
CE certified
TUV certified
cULus listed
CCC certified
IEC/EN 62061
IEC/EN 61508 category 4
EN 954-1
属性 | 数值 |
---|---|
范围 | Safemaster |
系列 | LG 5925 |
类型 | 输出模块 |
使用于 | LG 5925 |
电源电压 | 24 V 交流/直流 |
正常状态配置 | 3 常开/常闭(安全) |
额定功率 | 1.5 W, 3.7 VA |
安装样式 | DIN 导轨 |
尺寸 | 90 x 22.5 x 121 mm |
接端类型 | 端子块 |