J 类熔断器
真正双元件熔丝,在 500% 过载时具有至少 10 秒的延时
双元件结构可减少功率损耗并使运行温度更低
高断开容量: 300kA
额定电压 600V 交流
由于对短路的快速响应,因此具有高电流限制
独特的尺寸可确保不同的熔断器不能被替换
库存号 513-0623 和 513-0718 具有插片接线端子
UL 248-8 J 类
UL 认可;CSA 认证
Want to safeguard your equipment from damage through current overload? Turn to this centred tag fuse from Eaton. It's suitable for installation in many applications thanks to its compact size of 1.13 (W) x 4.63in (H). The current-limiting component clears a current fault within its first seconds and protects other components unable to withstand thermal and magnetic forces. This fuse has a low electrical resistance so it runs at a cooler temperature and is less likely to break or overheat.
High rupture capacity or interrupt rating of up to 300,000A for maximum protection against current surges
True-dual element fuse with minimum 10 second time-delay at 500% overload to pass harmless motor or current surges
Current rating of 100A for safe use in medium-voltage applications
This fuse's speed is marked as Class T also known as slow-acting (Trage). A Class T fuse has a built-in delay triggering slow-acting reaction to harmless current surges and temporary overload but will speedily act on sustained current overloads or short circuits.
Eaton formerly known as Bussmann
美国标准熔丝管,包括快熔式小型和双元件延时类型
属性 | 数值 |
---|---|
额定电流 | 100 A |
熔断器尺寸 | 1.13 x 4.63in |
额定电压 | 300 V ac, 600 V 交流 |
固定中心 | 92.2mm |
焊接宽度 | 19.05mm |
熔断器速度 | T |
高分断能力熔断器 | 是 |
总体长度 | 117.6mm |
主体直径 | 28.7mm |
主体长度 | 66.8mm |
标准方向 | 中心 |