BD00HC5WEFJ is a LDO regulator with output current 1.5A. The output accuracy is ±1% of output voltage. With external resistance, it is available to set the output voltage at random (from 1.5 to 7.0V) and also provides output voltage fixed type without external resistance. It is used for the wide applications of digital appliances. It has package type: HTSOP-J8. Over current protection (for protecting the IC destruction by output short circuit), circuit current ON/OFF switch (for setting the circuit 0μA at shutdown mode), and thermal shutdown circuit (for protecting IC from heat destruction by over load condition) are all built in. It is usable for ceramic capacitor and enables to improve smaller set and long-life.
Maximum output current 1.5A
High accuracy reference voltage circuit
Built-in Over Current Protection circuit (OCP)
Built-in Thermal Shut Down circuit (TSD)
With shutdown switch
Output voltage variable type (1.5V to 7.0V)
Package: HTSOP-J8
属性 | 数值 |
---|---|
调节器类型 | 线性电压 |
最大输出电流 | 1.5A |
输出电压 | 7 V |
输出数目 | 1 |
线路调节 | 1 % |
负荷调节 | 1.5 % |
精确度 | ±1% |
安装类型 | 贴片 |
封装类型 | HTSOP-J8 |
参考电压 | 0.8V |
引脚数目 | 8 |
输出类型 | 可调 |
尺寸 | 4.9 x 3.9 x 1mm |
高度 | 1mm |
最大输入电压 | 8 V |
最高工作温度 | +85 °C |
最小输入电压 | 4.5 V |
最低工作温度 | -25 °C |